Philips CDC-935 CD Player

Post tags: | cd_player | philips_cd935 |

##

Don Allen Audio Mods

DIY Audio Mods

DAC to RCA gain

CDR with test tone

Possible Audio Section

Hagerman Piccolo MC Headamp

Piccolo MC Headamp

$149 box 1/2 kit

The Piccolo is an active moving coil pre-preamplifier designed to step-up the cartridge signal from MC to MM levels. Adjustable loading and gain offers optimization for any MC cartridge. The discrete JFET circuit offers super-quiet and distortion-free operation. Compatible with any MM phonostage.

Power is provided by either 4 internal AA batteries or a 120Vac external supply. The circuit employs super low-noise matched JFETs in a differential configuration, but tapping only the non-inverting leg for the output buffer, which can drive long cable runs. Careful attention to layout and wiring eliminate ground loop problems.

The Piccolo is offered as a “box/2”, which is not a full kit, but includes a blank PCB with the JFETs already soldered in place, the metal blue case (silkscreened), and a few assorted hardware pieces. Basically, it is a half-kit plus box. This makes assembly very easy for DIYers.

JdsLabs CMOYBB DIY KIT $42

CMOYBB DIY KIT

This kit contains all components required to electrically assemble a rechargeable cMoyBB v2.03R: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.

The cMoyBB makes a great first time soldering project. This kit contains all default components necessary to build the rechargeable cMoyBB v2.03R.

OBJECTIVE2 DIY KIT $69

OBJECTIVE2 DIY KIT

This kit contains all components necessary to build the Objective2 circuit board: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Parts arrive individually packaged and labeled for your convenience. Soldering is required.