Using Routers
Router Bits
Insert Router Bits
lumberjocks.com
Amana RC-47104
amanatool.com
RC-47104 Insert Flush Trim 1/2 Dia x 13/16 x 1/4 Inch Shank
- Tool No. RC-47104
- Diameter (D) 1/2
- Cutting Height (B) 13/16
- Shank (d) 1/4
- Overall Length (L) 2-5/16
- Replacement Bearing 47706
- Flutes 2
Amana RC-45226
amanatool.com Amana RC-45226
RC-45226 In-Tech Series Insert Straight Plunge 1/2 Dia x 30mm x 1/4 Inch Shank
amazon $18.64 Amana RC-45226
Amana RC-47104
amazon Amana RC-47104 INSERT
$31.13 Amana RC-47104 INSERT FLUSH TRIM 1/2 DIA 1/4
amazon CMT Insert Carbide Straight Router Bit with 5/8-Inch Diameter with 1/2-Inch Shank
CMT 653.158.11 Insert Carbide Straight Router Bit with 5/8-Inch Diameter with 1/2-Inch Shank $67.79
amazon CMT Insert Carbide Flush Trim Bit
CMT 657.192.11 Insert Carbide Flush Trim Bit with 3/4-Inch Diameter with 1/4-Inch Shank $50.28
amazon Freud 3/4-Inch Diameter Insert Flush Trim Router Bit with 1/2-Inch Shank
Freud 43-128 3/4-Inch Diameter Insert Flush Trim Router Bit with 1/2-Inch Shank $72.47
lumberjocks blog knotscott - Strategies For Choosing Router Bits
grizzly.com $26.50 Router Bit 12 pc. Set, 1/2” Shank
amazon $45.75 MLCS 15-Piece Bit Set
MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks
- 4 Straight (3/8”, 1/4”, 1/2”, 3/4”)
- 1 Round Over (3/8”)
- 1 Cove (1/2”)
- 1 Roman Ogee (5/32”)
- 1 45° Chamfer
- 1 Flush Trim (1/2”)
- 1 Rabbeting (3/8”)
- 1 Dovetail (1/2” x 14°)
- 1 V-Groove (3/8”)
- 1 Hinge Mortising (1/2”)
- 1 Panel Pilot (3/8”)
- 1 Round Nose (1/4”)
- 1 Allen Wrench and 1 bearing to convert Round Over bit into Beading bit.
- Wood storage box included.
grizzly.com $12.00 3 pc. plywood set
Make your dadoes fit better with these straight bits sized for modern plywood. Set includes 7/32”, 15/32” and 23/32” and a wooden box.
Router dado jigs
woodsmithshop.com woodsmithshop Adjustable dado guide
local copy
lumberjocks forum Kent Shepherd version
youtube Jay Bates - Perfect Dados With A Router Dado Jig - 181
Matthew Cremona
youtube Matthew Cremona - Router Guide Bushings - Ask Matt #18
Discusses offset. Centering cone
youtube Matthew Cremona - Plunge Cuts with a Standard Straight Bit - Quick Tip
youtube Matthew Cremona - Flattening Boards with a Router Sled