Cabinetmaking
John Louis Feirer - Cabinetmaking and Millwork
Cabinetmaking and Millwork - $3.60 at AbeBooks.com
- Cabinetmaking and Millwork - Feirer, John Louis
- Published by Macmillan Pub Co (1977)
- ISBN 10: 0870022385 ISBN 13: 9780870022388
the KISS II system A simplified approach to building cabinets using the 32mm system pdf
https://www.youtube.com/watch?v=F3uOkMK4UqM
Kris Reynolds - Custom Kitchen Cabinets part 1 youtube
woodmagazine.com right angle brace article
Right-angle brace gives you a corner on clamping tasks
Anytime you need to hold two large workpieces at a right angle, say while you’re screwing or gluing them together, you need one or more of these plywood triangles. As shown in the photo right, these right-angle braces have two notches for accepting clamp jaws. The circular cutout comes in handy for temporarily holding the brace in place with a spring clamp while you position bar clamps on the notches. It also gives you a way to hang the jig on a peg when you’re through.
The more you use this shop helper the more jobs you’ll find for it. Although we designed the brace for carcase assembly, we also found it handy for holding an on-edge picture frame rigidly to a bench as we sanded the frame’s edges.
THISisCarpentry youtube Simple Cabinet Construction, Part 1: Story Poles & Boxes
Gary Striegler demonstrates how to build a simple two-piece cabinet– including doors, drawers, and moldings, with basic carpentry tools.
Bisquick Cabinets by Gary Striegler on July 10, 2015
Where can one get American made plywood?
Columbia Forest Products,,, try Home Depot for starters
columbiaforestproducts.com Columbia Forest Products
2755 East Las Vegas Colorado Springs, Colorado 80906 United States Austin Hardwoods - Denver Denver, Colorado