Hoop Greenhouse
youtube Bigelow Brook Farm (Web4Deb) - What Type of Greenhouse Should You Build?
uvm.edu/sustainableagriculture/Documents High Tunnels - Selecting Your Structure
doorgarden.com/2008/10/27 How to build My 50 Dollar Greenhouse by david laferney
Simpler Door by david laferney
Build My Own Greenhouse Gothic
10’X10’ Portable “Modified” Gothic Hoophouse Here is a quick easy gothic hoop design built using the EC ‐ 12 or DY ‐ 12 our Quick Hoop Benders . Produces a nice gothic hoop 10 feet wide with high peak profile making it great for snow load areas of the country. It can also be built using either 1 3/8” fence top rail tubing or the less expensive 1” emt tubing. The two hoop sections result in a 145 degree connection angle at the peak. Fittings can be found on the internet from several sources. Here is a starter link to one fitting supplier. Note, If using Our gothic base connectors you must start bending at 10” mark to achive a vertical connection to the connectors.
Mark two each pcs of 1”emt 10” inches from the end of each pipe with any paint marker. These ends will be the bottom of the gothic hoop. Began bending 1” emt by sliding the 10” inches of the marked end of the tube through the holding strap of the Model DY ‐ 12 or Model EC ‐ 12 bender. Proceed with bending, making sure each bending stroke stops before reaching end of the bender, and insuring that the tubing remains level with the bender on the output side of the bender… For the last bending stroke insert special lever bar and bend until junction of lever bar/emt contact the bender body. Remove tubing, repeat steps on second emt tube. Note, If using Our gothic base connectors you must start bending at 10” mark to achive a vertical connection to the connectors. Otherwise you can reduce the base width began the bending process at a value less than 10” inches.. Or widen the base width began bending at a value more than 10” inches .
Model DY ‐ 12
DY-12 Hoop Bender - Price: $54.99 Sale Price: $43.99
The DY-Series High Tunnel Hoop House/Greenhouse Bender The “Do-It-Yourself” Hoop Bender Designed for bending 1 3/8” 18 17 & 16 gage fence tubing, can also bend any steel tubing less than 1 3/8”o.d.
Model EC ‐ 12
C - 12 Hoop Bender - Price: $169.99 Sale Price: $135.99
Our Professional “C” Series Greenhouse Hoop Bender The “Do-It-Yourself” Hoop Bender Designed for bending 1 3/8” 18 17 & 16 gage fence tubing, can also bend any steel tubing less than 1 3/8”o.d.
Ground Anchor
$26 at amazon prime Ground Anchor System IS 50016 6 Piece kit With Drive Rod
$44 at Home Depot 6-Piece Ground Anchor Kit
American Earth Anchors
americanearthanchors.com - 6 at $20.70 each (PE18) 18-inch Penetrator with 1-inch hex head - $122
1" or 26mm socket Socket top is 7/8" high flange diameter 2" neck diameter 1" flight diameter 1 3/4" Penetrator 90° bracket $13.75 each at qty. 6 Item #: PE-L90 Tie-off cable for Penetrators with a 2" flange. $5.04 each at qty 6 Item #: PE-TC Penetrator bracket for securing 2" or smaller pipe. $15.35 each at qty 6 Item #: PE-2P