CenturyLink NID by Corning UNI-30C6-13U1

suttlesolutions.com/catalog/ Suttle Outdoor DSL Splitter 649A1

Online 649A1 DSL Splitter Datasheet

$37.78 at amazon SUTTLE 1 649A1 / DSL Pots Splitter

homephonewiring.com/dsl An Overview of Wiring Requirements to Support Residential DSL Service

homephonewiring.com

homephonewiring.com/materials homephonewiring.com Store

homephonewiring.com sells ADSL2+ / VDSL2 Splitter (Wilcom PS-36i) for $40.95

PS-36 Indoor Splitter descript at wilcominc.com

PS-36 page at wilcominc

Wilcom PS-36 Wall-mount VDSL2 POTS Splitter

The Wilcom PS-36 Master Splitter is a passive low-pass filter designed to provide POTS service in concert with VDSL2 technology. The device blocks high frequency (20kHz-30MHz) energy from interfering with voice equipment and prevents POTS noise from causing data errors on the xDSL connection. The PS-36 is backwards compatible with all xDSL systems.

The Wilcom PS-36 is ideally suited for video over xDSL applications such as IPTV (Internet Protocol Television) by providing robust ringtrip protection for non-zero coss ringers to eliminate video pixelization during off-hook and ring-trip events.

The PS-36 can be easily mounted inside the customer premises where the phone service enters the building. Two types of connection options are supported by the PS-36 splitter: a screw-type terminal block and standard RJ jacks. This allows the installer to simply connect the existing premise wiring to the PHONE connector or RJ jack on the splitter, and have POTS service up and running within minutes without expensive and time-consuming rewiring. A “home-run” connection with data-grade cable is recommended direct to the xDSL modem from the ATU-R/MODEM connection on the splitter.

Model PS-36i-01 uses professional-grade, gell-filled IDC connectors rather than a screw terminal block for quicker installation without wire stripping.

cromwell-intl.com/technical How to Install a DSL Line

wilcominc.com/item.cfm PS-32 NID-mount VDSL2 POTS Splitter

The PS-32 Master POTS Splitter is compatible with all ADSL and VDSL2 coding schemes

The Wilcom PS-32 VDSL2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with DSL technology. The device blocks high frequency (20kHz - >30MHz) energy from interfering with POTS equipment. The PS-32 employs a low-pass filter for standard voice-grade lines.

The Wilcom PS-32 POTS Splitter is unique because of its convenient mounting location inside the Network Interface Device (NID). The PS-32 is ideally suited for video over DSL applications such as IPTV (Internet Protocol Television) over ADSL2+ or VDSL2. The PS-32 includes robust ring-trip protection for non-zero cross ringers to eliminate video artifacts due to pixelization.

The PS-32 is similar in size to a standard station protector and mounts on the Telco side inside the Network Interface Device. The terminal strip allows for easy installation so the installer can simply connect the existing premise wiring to the PHONE terminals on the splitter, and have POTS service up and running within minutes without expensive, and time-consuming rewiring. ATU-R terminals connect directly to the DSL equipment with existing cable. (Data-grade cabling is recommended for new installations.)

Model PS-32i uses professional-grade, gell-filled IDC connectors rather than a screw terminal block for quicker installation without wire stripping.

PS-32 data sheet at wilcominc.com

PS-32 NID-mount VDSL2 POTS Splitter. PS-32 VDSL2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with DSL technology. The device blocks high frequency (20kHz - >30MHz) energy from interfering with POTS equipment. The PS-32 employs a low-pass filter for standard voice-grade lines. The Wilcom PS-32 POTS Splitter is unique because of its convenient mounting location inside the Network Interface Device (NID). The PS-32 is ideally suited for video over DSL applications such as IPTV (Internet Protocol Television) over ADSL2+ or VDSL2. The PS-32 includes robust ring-trip protection for non-zero cross ringers to eliminate video artifacts due to pixelization. The PS-32 is similar in size to a standard station protector and mounts on the Telco side inside the Network Interface Device

dslreports.com/forum/ Help with NID Splitter and Home Run

I went ahead and bought a Wilcom PS-32 splitter

Network Interface

Paul Kostner youtube WITC Broadband Academy Network Interface Device (NID)

speedtest.att.com/speedtest 46.3 Mbps down. 4.94 Mbps up. Thu Sep 14 14:09:38 MDT 2017

speedof.me/ 49.74 Mbps down. 5.18 Mbps up. Thu Sep 14 14:17:41 MDT 2017

speedtest.googlefiber.net/ 46.7 Mbps DOWNLOAD. 5.45 Mbps UPLOAD. Thu Sep 14 14:20:51 MDT 2017

speedtest.net/?a=1 from ookla.com ping 21 ms. 46.09 Mbps down. 4.67 up. Thu Sep 14 14:27:55 MDT 2017

Wall Plates

Punch Down Tool

trendnet.com/products/tools/ Punch Down Tool with 110 and Krone Blade TC-PDT

$18 at amazon TRENDnet Punch Down Tool with 110 and Krone Blade TC-PDT

Keystone Wall Plate

$14.75 for 5 at amazon Shaxon BM303WP2-5A 2-Port Single Gang White Keystone Wall Plate, 5 Pack, Bagged

$8.94 for 5 at amazon Shaxon BM303WP4-5B, 4 Port Single Gang White Keystone Wall Plates, 5 Pack

Blank Keystone Inserts

$7.99 for 20 at amazon Cable Matters (20-Pack) Blank Keystone Jack Inserts in White

Punch Down Keystone Jack

RJ45 Punch Down Keystone Jack

5 for $8.99 at amazon CableCreation 5-PACK Cat6 / RJ45 Keystone module Connector, Keystone Punch Down Stand , White

• Heavy duty Cat6 RJ45 Keystone modular jack, Can be used with keystone wall plates, patch panels, or surface mount boxes
• Supports T568A and T568B wiring with color coded 110 blocks. It Supports 110 or Krone dual type termination and accepts 23 or 24 AWG solid Ethernet cables
• Color coded wiring diagram next to wire clips
• UL Listed, TIA/EIA 568-C.2 Verified, RoHS Compliant
• Package include: 5 x Keystone module Connector

$9.99 for 5 at amazon TNP RJ45 Keystone (5 Pack) - Cat6 Cat5e Cat5 Compatible 8P8C Ethernet Network Jack Insert Snap In Adapter Connector Port Inline Coupler For Wall Plate Outlet Panel (White)

$13.90 for 10 at amazon 10-Pack Ethernet Keystone, GearIT Cat6 RJ45 Punch-Down Keystone Jack Connector, White

RJ11 Punch Down Keystone Jack

10 for $14.99 at amazon 6P6C White RJ11 CAT3 Telephone Network Keystone Jack Insert for Wall Plate 10/pk

• CAT3 Telephone Keystone
• RJ-11/12 keystone jack is 6-position 6-conductor (6P6C) and designed for voice application
• Terminate with 110 punch down tool
• Compatible with all wall plates, surface mount boxes, and blank patch panels
• Termination cap included